NEW 18,000 ft./lb. CRANE FROM VENTURO

The ET18KX is a crane designed to meet the market requirements for a crane with an 80% increase in capacity over the industry standard ET10KX and a 12% increase over typical competitive 4,000 lb cranes!  The crane can be  installed on most super duty truck chassis. It is ideally position between the 10,000  and the 25,000 ft./lb.. cranes that dominate the market.

ET18KX features: 4,500 lb. Winch, Power Rotation, Power Boom Elevation and a Power Boom Extension of 8' to 12' and a manual extension from l2' to 16’. The ET18KX is a self-contained 12-volt electric/hydraulic crane requiring no auxiliary PTO and pump. A  fully hydraulic HT18KX model will be released subsequently.

Standard equipment includes capacity overload shut-off system, anti-two blocking, 80’ of 5/16” wire rope with safety hook, 25’ remote control pendant, snatch block with swivel hook safety latch, and master disconnect switch.

For advance information on the new ET18KX and Venturo's other 39 model combinations, contact Venturo Sales at 1-800-226-2238, e-mail us at websales@venturo.com .